![vcds 12.12 interface not found vcds 12.12 interface not found](https://www.team-bhp.com/forum/attachments/technical-stuff/1253472d1403593784-vcds-vag-com-diagnostic-system-vw-skoda-discussion-thread-screenshot-16.jpg)
In this thread there would be much less pages if you first read and then ask a question. Hi, every cable has its own program, you probably used all three cables with the same program, read a few pages back and you will solve your problem. VCDS Hex V2 18.2 English and 18.2.1 Polish version. This is my cable inside (after disassembling cover). I did some research and found this forum and I hope somebody will help me because I am newbie with this :) I know that this is possible to fix these broken cables but I really don't know anything about programmers or flashing OBD cables.Ĭan anyone explain to me step by step how can I fix these cables? I would be very grateful for any help
#Vcds 12.12 interface not found Pc#
2 cables are not working (one cable when connected to PC only shows: "interface found" but after connecting with OBD2 shows: "interface not found" and one cable always "interfecae not found" with or without connecting into USB/OBD). 1 is working perfect, connects properly with my PC and cars. I dont have the tools or the knowledge to solder and reprogram my cable. Pasting links to pictures of the cable i have today. Is the description correct about the fist cable or should i save the money buy the second one instead? The first one looks like it can be a HQ clone since it says it supports internet, and it also supports updates. I have found two different cables on that i am choosing between. I only see people talk about the cable but no link to this HQ clone. I have seen someone talking about HQ clone that you can buy and still be able to access the internet on the computer, i think this will be the way to go so it doesn´t happen again.
![vcds 12.12 interface not found vcds 12.12 interface not found](http://lightpassl.weebly.com/uploads/1/2/7/4/127419988/566581103_orig.jpg)
![vcds 12.12 interface not found vcds 12.12 interface not found](https://incartec.blob.core.windows.net/media/T6-composition-media-radio.jpg)
I am in the need of a new cable after a friend borrowed the computer and accidentally accessed the internet so now my it says my cabel is unregistered. The cable is still good, as under VagComHW the result is bootloader is available, ''hardware'' is 0x46 and FW is 1.96 or 1.95 if I remember correctly. uninstall VCDS 18.9 and reinstall apparently 18.9 VER 1.0.ĭid flash the cable with Kolimer 7.2 utility but unable to get the CAN bus to respond. Since then, I've tried Kolimer 7.1 and 7.2 loader. Used the cable for a few moment and got the message/error when I tried to apply a long coding for a modification.
#Vcds 12.12 interface not found software#
I used the VCDS 18.9.exe that was provided with the cable at first (When I started the software you can see a pop up written VCDS loader 7.0) And go to option and do TEST, If CABLE and all is ok Activation should back to Activate status. You use kolimer 7.2 loader? Use loader but with eng 18.9.0. Than bootloader still Life then you can try flashing using VAGCOM_EEWriteLang And press READ (PRESS WITH CONNECTED PLUG TO 12V) if show you not reapond than you brick atmega162. I'd flash the cable using VAGCOM_EEWriteLang (without changing anything on the cable)īut still getting that Not ready CAN status when doing test.Ĭan anyone help ?You use kolimer 7.2 loader? Use loader but with eng 18.9.0. Since then, when i do my test I get the CAN Not ready result. Was able to use it for a few minutes and after that got a message saying to get a valid license/interface (can't remember) Just got this little cable for my Audi s3 2017 (it's actually written VAG189 on mine)